This is a
brand new heat sink, specifically designed and precision built in the USA.
The first ultra-high power passive (fan-less) heastink. We call it
the HD (High Density) Heatsink. This thing is a BEAST!
Steve's LEDs has created the
first heatsink that can handle as many LEDs as you can fit on it without using
a fan! When you don't have a fan to blow air across a heatsink, you rely
heavily on a large surface area. A 12" length of this heatsink has
over 2 square feet of surface area! This means that you can stack LEDs
end to end across the entire length of the heatsink, and it still won't
overheat. For even closer spacing, use our PARMAX LED array boards.
Beware of other LED heat sinks
that do not post the specifications - those have strict limits on how many LEDs
you can put on them, and they run HOT with only a few LEDs. Ours have been
tested to 50W of LEDs per foot! That is about 16X 3W LEDs in a one
The HD heatsink is designed to
run as cool as possible. It includes a splash shield and it is easy to
seal the LEDs in creating, a IP66 compliant light fixture.
It can be set directly on a
glass top, suspended, or flush mounted to the ceiling of your hood.
This heatsink allows your DIY
design to look 100% professional, and run 100% silently. No additional
power adapters, brackets or accessories are required to mount a fan because it
doesn't need one. Yet, you can have just as many LEDs as an equivalent
size heatsink that has a fan.
Unique screw channel design
eliminates the frustrating and time consuming T-Slot and nut mounting
systems. All you need is two of our #6 STAINLESS MOUNTING SCREWS AND INSULATING WASHERS, a screwdriver and a 10 seconds of your time
to get an LED mounted securely. LEDs also requires THERMAL PASTE for
maximum performance. This heat sinks accept any LED that has outer
dimensions smaller than 1.60" - which is large enough for standard 20mm
stars, array boards, Luxeon M Squares, and many COB LEDs currently available.
One of the best features is
that this is a linear heatsink providing even light distribution and
eliminating hotspots! Don't group your LEDs together in a cluster, that
does not distribute light evenly. This linear heatsink provides superior
light blending and distribution for maximum growth.
This heastink comes in ~12 inch
increments, up to a maximum length of 48". This heastink can
be cut to size to fit your exact specifications - no extra charge for this.
For example - if you need a 22" length, please order a 24"
length, and specify for it to be cut to 22".
Polycarbonate/Lexan splash guard
Waterproof Cable Exit Nut
(Just add LEDs!)
Need more assistance or discount quantity pricing over 20 pcs? Email us at [email protected]