TECH SPECS-
-Max # LEDs -7 LEDs (or combined LED voltage not exceeding 24.5V)
-Type of driver - Bucking Linear
-Max Current - 1000ma.
-Max Voltage input - 25.0Vdc
-Max Voltage output - 25.0Vdc
-Minimum Voltage input - 13.0Vdc
-Minimum Voltage output - 12.5Vdc
-Maximum Efficiency - 96%
-PCB - Extra heavy duty 2 oz copper
-Lifespan - Every component that the driver is built with is rated for a minimum of 200,000 hours, or 23.5 years of continuous usage 24 hours per day.
-To Obtain Max Efficiency - You must use an adjustable voltage power supply to obtain maximum efficiency and to guarantee that the driver is outputting the specified current rating.
-Thermal Protection - YES, unit will power down if temp rises to 150°C
-Wire size - Use 22 gauge wire only for power input. Use a minimum of 24 gauge solid core wire to attach LEDs
-Dimming - YES, it comes with a FREE remotely mountable dimmer knob!
-Available versions- 350ma, 700ma, 1000ma.
-Dimensions - 2.0in X 1.95in X 0.43in
-Thermal Dissipation- capable of dissipating over 3 watts when attached to a large heatsink*
-Operating Frequency of the driver - 5 MHz! One of the fastest driver chips on the market! ZERO flickering when dimming!
-Arduino input - YES. This is plug and play with Arduino, and even works with stock Arduino programs!
-PWM Input - YES. This accepts standard PWM for dimming and automation. Accurate linear dimming is compatible with PWM frequencies from 100 Hz to 5 kHz for PWM duty cycle down to 1%. PWM frequencies up to 50 kHz can be supported for duty cycles greater than 10%.
-Aquarium controller compatibility - YES! Any aquarium controller with 0-10V dimming can control this driver using Steve's Aquarium Controller Harness. For this driver to accept a 0-10V input, Steve's Aquarium Controller Harness is required.
- 3 year limited warranty against manufacturing defects. Steve's LEDs, LLC will determine the nature of the defect, and your item may be repaired or replaced free of charge.
- Current version shipping is V8.0