-Thermal adhesive type - Single part, no mixing required, just use like normal glue! This is not as permanent as thermal epoxy, the LED can be removed without damage.
-Model number Momentive TSE3941M
-Viscosity - High, easy to spread!
-Thermal Conductivity 0.84W/m*K
-Syringe type - a premium medical grade Terumo® 3cc syringe with Luer lock tip, so that detachable applicator needles can be attached.
-Cure type - Humidity based (Higher humidity = faster cure times) 80% is optimum.
-Working time - 4 Minutes
-Cure/Dry time- This is an advanced material, and begins to cure after only 1 hour, with a full cure after 5 days. After thorough testing, we have found that we can gently solder the LEDs together after only 1 hour, being especially careful not to put any pressure on the LEDs. (test results based on 60% relative humidity. (Higher humidity = faster cure times)
-NOT FOR USE ON LED DRIVERS! Please use thermal paste for driver mounting.